Chewing gum is one of the most annoying substances to find stuck in your carpet. Before attempting to remove it, take the time to review the following chewing gum removal guide to avoid causing permanent damage to your floor covering.
Attempt to Remove the Chewing Gum with WD-40
WD-40 is a lubricant, which can help dislodge the gum from the carpet fibres. You can also use other lubricants or degreasers for quick and easy carpet cleaning.
Spray the WD-40 or other lubricant on and around the chewing gum. All exposed surfaces should be lubricated sufficiently to keep the gum from sticking to the carpet as you attempt to remove it. After spraying the gum with WD-40, allow it to sit for several minutes. Using your hands or a blunt scraping tool, carefully attempt to pull as much gum from the carpet as you can. The gum will likely be slippery but should not stick to your hands or the carpet.
Small pieces of gum and slight staining may remain after pulling the larger chunks from the carpet. Use an old toothbrush and additional WD-40 to target the smaller pieces. Spray a small amount of WD-40 while vigorously scrubbing the affected area. Use a clean rag to soak up any residue from the WD-40.
Freeze the Chewing Gum with Ice Before Removing it
Ice can freeze the chewing gum, making it easier to remove from the carpet. Place a handful of ice in a plastic bag and place the bag on top of the chewing gum. Allow the ice to set for several minutes as the gum hardens.
Start pulling or scraping the gum from the carpet immediately after removing the bag of ice. Remove as much of the gum as you can. You may need to repeat this process a couple of times to remove additional chunks.
You can also buy freeze sprays that are designed for removing chewing gum and other debris from carpeting and fabrics. The freeze spray instantly freezes the gum, allowing you to chip it away using a scraper tool. Along with gum, a freeze spray can help remove candle wax, putty, and other gummy substances.
Use a Hairdryer to Remove Chewing Gum from Carpet
A third method for removing chewing gum involves using a hairdryer to carefully melt the gum. Aim the hairdryer directly at the chewing gum. As the gum starts to soften and melt, use a plastic bag to pick up the chunks. The warm pieces of gum should stick to the plastic bag.
Use caution to avoid melting the gum too much. You just want to soften it enough to lift it with a plastic bag. If the gum continues to melt, it may become more difficult to remove.
Use White Vinegar and Water to Remove Leftover Stains
After removing most of the gum from the carpet, you may notice slight staining. This is more common with fruity-flavoured gum that contains a lot of artificial colouring.
Use a DIY carpet cleaning detergent to eliminate leftover stains. Combine equal parts of white vinegar and water in a spray bottle and spritz the affected area. Allow the mixture to sit for several minutes before blotting with a clean cloth.
The stain should gradually lighten. If the stain remains, repeat the steps with the DIY carpet cleaner until the stain is gone. You may also try using a white paper towel to blot the stain instead of a clean cloth. The fibres of the paper towel may absorb more of the stain.
If these methods fail to remove the chewing gum, or you worry about damaging your carpets, you could always hire a professional carpet cleaning company to handle the problem. Experienced carpet cleaners can easily remove the gum and any other stains that you discover.
Steaming cleaning helps extend the life of your carpets. Many homeowners have their carpets professionally steamed by expert carpet cleaners...